Pedestal Systems
- Compatible with solid, perforated and grating floors
- Pedestals available for all seismic environments
- Head assembly finishes: bare aluminum or e-coat
- Tube finishes: bare aluminum, e-coat or epoxy powder coat
- Base finishes: bare aluminum, e-coat or epoxy powder coat
- Axial load performance of pedestal assembly is 5,000 – 11,000 kg
- Available in a module size of 600 mm
- Finished floor heights from 160 – 1,800 mm
Aluminum Pedestal
The aluminum pedestal is used in applications where a non-ferrous material is required. The pedestal assemblies are compatible with all of our flooring products including solid, perforated and grating panels. The type of pedestal is chosen based on seismic zone, finished floor height and floor loading conditions. The aluminum and aluminum / steel pedestals can be mixed in the same flooring without affecting the panels.
Advantages:
- Non-ferrous material
- Can be easily cut onsite
Aluminum / Steel Pedestal
For other applications where an all aluminum pedestal is not needed, projects with a tight budget or sensitive cleanroom projects, a mixed aluminium / steel solution can be used. It consists of an aluminum head with steel stud and steel tube that works with a steel base plate assembly designed for highly seismic locations, high floor heights and heavy loading. The aluminum and aluminum / steel pedestals can be mixed in the same flooring without affecting the panels.
Advantages:
- For high area loads
- For extreme seismic requirements
- For high floor heights